Installation - Electrolux DB52 Instruction Manual

1- Remove the packaging base
Two people are required to remove the base from
the package.
Carefully tilt the refrigerator to one side and break
this side of the base to remove it.
Tilt the refrigerator again to the other side and
remove the rest of the base.
Remove all foams and adhesive tapes from the
shelves and / or drawers.
2- Choose the installation place
Respect the minimum distances between the
refrigerator and the walls:
On top: 15 cm / side: 10 cm / back 15 cm.
ON TOP
BACK
38

Installation

SIDE
Do not install the refrigerator outdoors or under the
direct incidence of sunlight.
Avoid the proximity of the refrigerator with
chemicals or heat sources (stoves, ovens, etc.),
and areas with frequent water handling (tank, sink).
3 – Level
Adjust the leveling feet in order to ensure perfect
stability of the refrigerator, avoiding swinging
movements. Let the front castors turn freely.
For this the leveling feet should be flat on the floor.
For better closing doors, the refrigerator should be
slightly tilted back.
The proper operation of the refrigerator depends
on its perfect leveling.