Summary of Contents for Strata Furniture Mission Rim
Page 1
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0901 Parts in the Arm Box: Corbels x 4 Arm- outside view Arm- inside view Parts in the Body Box: Back Deck x 1 Seat Deck x 1...
Page 2
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0903 Hardware in this Box: Short Bolts (50mm) x 4 Short Bolts (60mm) x 6 Barrel Nuts Long Bolts (80mm) x 8 For the Corbels...
Page 3
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0901 Assemble the Back Panel between the Arms. Wooden Barrel Nut Dowels 80mm Back Panel Bolt Barrel Nut Wooden...
Page 4
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0901 Assemble the Stretcher between the Arms. Attach the Advance Arms to the Arms Back Panel Wood Block Washer...
Page 5
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0901 Assemble the Bungies under the Seat Deck. Screw Bungie Lay the Seat Deck sticker-side down. Seat Deck Inner Rail...
Page 6
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0901 Fit the Seat and Back Decks to the Frame. Connect the Advance Arms to the Back Deck.
Page 7
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0903 Attach the Connector Bar to the Legs. Bungie 60mm Bolts Foot Foot Connector Bar 60mm Bolts Foot Pull the Seat Deck out to the front of the frame and flip it up.
Page 8
S t r a t a F u r n i t u r e M i s s i o n R i m MR 0903 Attach the Corbels to the Arms. Operating Instructions: To convert into couch position: To convert into couch position: Fit the dowel at the top of the Corbel into the hole •...
Need help?
Do you have a question about the Mission Rim and is the answer not in the manual?
Questions and answers