Page 1
S t r a t a F u r n i t u r e A d d i s o n ADD 0404 Parts in the Arm Box: Corbels x 4 Arm- outside view Arm- inside view Parts in the Body Box: Back Deck x 1 Seat Deck x 1 Back Panel x 1...
Page 2
S t r a t a F u r n i t u r e A d d i s o n ADD 0504 Hardware in this Box: Short Bolts (30mm) x 2 Bolts (60mm) x 6 Bolts (50mm) x 4 Long Bolts (80mm) x 10 For the Back Panel For the Advance Arms...
Page 3
S t r a t a F u r n i t u r e A d d i s o n ADD 0404 Assemble the Back Panel between the Arms. Wooden Dowels Barrel Nut Back Panel Corbel Back Panel Wooden Long Bolt Dowels...
Page 4
S t r a t a F u r n i t u r e A d d i s o n ADD 0404 Assemble the Stretcher between the Arms. Back Panel Long Bolts (80mm) JCB Barrel Nuts Wooden Barrel Nuts Dowels Stretcher Fit the Stretcher, with the Barrel Nut holes on...
Page 5
S t r a t a F u r n i t u r e A d d i s o n ADD 0404 Join the Seat and Back Deck together. Long Clevis Pin Plastic Runner Sticker - facing upwards Back Deck Lock the Clevis Pin with a washer...
Page 6
S t r a t a F u r n i t u r e A d d i s o n ADD 0404 Attach the Connector Bar to the Legs. Seat Deck Lift the Seat Deck so it resting on the Back Deck. The feet should be pointing downwards.
Page 7
S t r a t a F u r n i t u r e A d d i s o n ADD 0404 Fit the Seat and Back Decks to the Frame. Connect the Advance Arms to the Arms. All joints must be left loose.
Page 8
S t r a t a F u r n i t u r e A d d i s o n ADD 0404 Attach the Corbels to the Arms. Operating Instructions: To convert into couch position: To convert into couch position: Fit the dowel at the top of the Corbel into the hole •...
Need help?
Do you have a question about the Addison and is the answer not in the manual?
Questions and answers