Table of Contents
Advertisement
POLYPROPYLENE BRUSH (PPL)
Used on all types of floors. Good resistance to wear and tear, and hot water (no greater than 60°C.). PPL is non-hygroscopic and therefore retains its
characteristics even when working in wet conditions.
PAD HOLDER
The pad holder is recommended for cleaning shiny surfaces.
There are two types of pad holders of the CENTRE LOCK type, equipped with a snap-type central locking system in plastic that allows the abrasive floor
pads to be perfectly centred and held without any risk of them becoming detached:
1.
fitted with a series of anchor points that allow the abrasive floor pad to be held and dragged while working
2.
fitted with a series of groups of bristles that allow the abrasive floor pad to be held and dragged while working
TABLE FOR CHOOSING THE BRUSHES
Machine
No. of brushes
GENIE B
1
CHOOSING AND USING THE BRUSHES
Code
Type of bristles
421701
PPL
422213
Pad holder – anchor
422001
Pad holder – bristles
22
Bristles
Brush
0.6
355
355
0.9
355
Notes
Advertisement
Table of Contents
