Table of Contents
Advertisement
ATTENTION: Always use detergents whose manufacturer's label indicates
their suitability for use with floor scrubbing machines. Do not use acid or
alkaline products or solvents without this indication.
always use low-foam detergent. To avoid the production of foam, put a
minimum quantity of antifoam liquid in the recovery tank before starting to
clean. Do not use pure acids.
ATTENTION: users are advised to always wear protective gloves, to avoid the
risk of serious injury to hands.
14. RECOVERY TANK
Make sure the recovery tank is empty, otherwise empty it completely.
Verify that the recovery tank is correctly inserted in its housing, and that the tubes are correctly inserted
in the tank elbows.
Verify that the cap is correctly closed.
15. ASSEMBLING THE BRUSH
To insert the brush:
1. Place the brush in front of the base body.
2. Raise the brush head by using the handlebars as a lever.
3. Place the brush head above the brush.
4. Activate the handlebar tilt lever.
5. Press the main switch to turn on the machine.
6. Pulse press the dead man's lever to engage the brush to the brush head.
PREPARATION OF THE MACHINE
15
Advertisement
Table of Contents
