Table of Contents
Advertisement
Hard disk drive management
1.
To set up a hard disk drive, enable the 'checkbox'
with a left click and then click on Init.
Warning
This will delete all data found on the disc.
2.
Click on OK to acknowledge the security prompt.
The hard disk drive is set up for use. Progress is
shown on the status bar.
3. Finish the setting with OK and then click on Next
17
Camera recording
1.
Select a "camera" from which to record.
2.
Enable the check box "Start recording".
3.
Select the recording type. It is possible to select
between "Continuous" and "Movement detection".
4.
Press Copy to apply the setting to other cameras.
Select the cameras that appear in the new screen.
Enable the appropriate checkbox with a mouse click.
5.
Complete the setting and the setup wizard with OK.
Setup wizard
Advertisement
Table of Contents
