Using Your Fridge Freezer; Control Panel; Temperature Control; Corona Light Mode - White-Westinghouse WR 747 SS User Manual

PART - 4.

USING YOUR FRIDGE FREEZER

Control panel

By using your fridge freezer control panel, the temperature values of the each compartment
and useful modes can be easily arranged. Control panel is placed on the right side of the
upper cover.
At below, you can find how to use control panel and the features of the special modes of the
your fridge freezer.

Temperature control

There are three different sets on the control panel which are Freezer , Fridge and Chiller
Compartments. To arrange the temperature values, the below route can be followed.
Temperature settings:
• Press MENU button (less than 1,5 seconds) then temperature set screen will be seen.
• Press NEXT/SELECT button to change the selected column.
• Press UP or DOWN button to change compartment's temperature values.
• To return the Main Screen you can wait 15 seconds or press the MENU button.
For freezer compartment, temperature range is between -24 ºC to -16 ºC, for Refrigerator
and Chiller compartment, they are +2 ºC to +8 ºC. Slightly fluctuations for these values are
normal, which depends on external influences such as an open door, the degree of humidity
and the room temperature.
Important note: Always allow 12 hours for compartments to reach the temperature you set.

Corona light mode

This mode is used for arranging the interior refrigerator lightning ON / OFF while the door
is closed. While the corona light is ON; despite of the door is close, it provides visibility and
easy access to the compartment.
Settings:
• Press MENU button (minimum 1,5 seconds ) until the Menu Function screen is seen.
• Choose Corona Light by using UP or DOWN button.
MENU NEXT / SELECT DOWN
EN -24-
UP