Drawer Adjustment - White-Westinghouse WR 747 SS User Manual

Drawer adjustment

After installation is completed, if drawers are not aligned, they can be adjusted horizontally
or vertically with the help of adjustment area. The adjustment area is behind the basket. This
area is accessible by removing the basket. To shift horizontally, change the position of screws
in the middleslots. To shift vertically, change the position of screws in the outer slots. Each
slot can shift by 2 mm. Since the holes on the doors are shifted to meet to align only one slot
at a time. Please see the illustration below.
Vertical
adjustment
Horizontal
adjustment
EN -21-