Installation Your Fridge Freezer; Before Starting Installation - White-Westinghouse WR 747 SS User Manual

PART - 3.

INSTALLATION YOUR FRIDGE FREEZER

It is important that the installation of your fridge freezer is done by a qualified installer.
Otherwise, your product will be out of warranty.
This manual is prepared for an easier, problem free and most importantly safe installation
process. Before beginning installation, it is strongly recommended to read this installation
guide carefully and entirely.
Any problems or questions you might have about the installation process, please contact
customer service or your authorized dealer.
Important product informations , such as model and serial number of the unit are listed in
product identity plate. Product identity plate is located on the left wall of the top cooler drawer
compartment. To access it please open the top cooler drawer and remove the basket. See
the illustration below.
location of rating plate (open drawer)

Before starting installation

Your fridge freezer could be installed as two different types. As Built-in or Freestanding.
Some parts are optional according to installation type.
Before the installation process of your fridge freezer, please make sure that the prerequisites
are provided. Such as; electrical connections, water supply and etc. Please check the techni-
cal specifications on the following pages.
Tools & Materils
• Dolly or an appropriate lift (Able To Support 400 Kg)
• 13 mm Socket Wrench and Open End Wrench
• Phillips Head Screwdriver
• M4 Allen Wrench
• Flat Head Screwdriver
EN -11-