About The Dvd-Player - AEG DVD 4531 USB/CR Instruction Manual & Guarantee

Available languages

English

Fig. 2/14

Inputs on the Front

Fig. 1/9

Fig. 1/10

Switching on the player

Fig. 1/1

05-DVD 4531 USB-CR_GB.indd 44

Optical

Connect an optical cable for transmitting the digital audio signal with

your playback device or amplifi er.

1. Insert the optical plug into the socket on the rear of the device.

2. Insert the optical plug into the corresponding socket of your playback

device or amplifi er.

USB Input (on the Front)

Connect your output device to the socket on the front of the DVD player.

Use a corresponding USB adapter cable if necessary.

Memory Card Slot (on the Front)

Insert an SD/MMC or MS memory card into the card slot on the front of

the device.

Turn on the main switch of the DVD player by pressing the "POWER"

on/off switch on the front of the machine.

About the DVD-Player

With this DVD-Player you can play a vast variety of DVD-formats

➯ Page 36, „Technical data".

However, you must be aware that in many cases DVDs are encrypted with

a so-called "Regional Code". This specifi es for which region in the world

the DVD is intended. As an example, the DVDs marked with regional code

"1" are intended for the USA and Canada. DVDs with regional code "2" are

for use in Europe.

21.02.2008 9:22:24 Uhr

Table of Contents

Dvd 4531