Basic Connections - Sharp DV-RW270S Operation Manual

Basic connections

Connect your VCR/DVD to your main antenna and TV set as shown in the illustration. When you have finished
making these connections, connect your VCR/DVD to the mains power supply (230V / 50Hz).
Antenna-Input
VCR/DVD
AC power cord 230V/50 Hz
Connecting this unit to your TV using the SCART connections
In addition to the coaxial cable connection, you should also connect the supplied SCART cable from the VCR/DVD
to your TV as shown. As well as transferring the high quality pictures and sound to your TV, the SCART connection
can automatically switch the TV to its AV channel for playback.
14
GB
TV
To Scart socket
DECODER/EXTERNAL Scart Socket (AV2)
TV Scart socket (AV1)
Supplied Scart cable
Supplied Coaxial cable
Some TV's do not support the Scart switching feature that automatically changes
the AV input channel. If your unit does not support this feature, you will have to
manually select the AV input on your TV's remote control. For more information,
refer to the operation manual of your TV.
Antenna
RF-Input
(from house antenna)
RF-Output (to TV)