Sharp DV-RW270S Operation Manual page 54

Recording a TV program
TV/VIDEO
Auto Rewind feature
This VCR will automatically rewind
the tape when the tape has ended
(except during OTR and TIMER
REC). It will also eject the tape.
NOTES:
• If the disc space become full, the
recording is stopped and
"RECORDING INTERRUPTED" will
appear on the screen.
• In the event of a power failure
during DVD recording including
OTR and TIMER REC, the program
can not be recorded on the disc.
When the power resumes, after the
VCR/DVD is turned on, the set
checks the disc to repair the error
which is caused by a power failure.
This checking process may require
a few minutes to about 1 minute 30
seconds according to disc condi-
tion. In this process "SYSTEM
ERROR PLEASE WAIT DISC
CHECKING" will appear on the
screen.
52
GB
To stop recording
Press STOP to stop recording.
NOTE:
When STOP is pressed during recording,
recording does not stop immediately and may
continue for as long as 1 minute maximum.
While this process, "PROCESSING PLEASE
WAIT" will appear on the screen.
To temporarily stop recording
Press PAUSE/STILL to avoid recording unwanted material.
"4" will appear on screen for about 4 seconds.
Press PAUSE/STILL again to resume re-
cording.
NOTES:
• When recording onto video tape, the
pause function will be released after
about 5 minutes to prevent damaging the video tape. The unit will
change to the STOP mode.
• When recording onto video tape, you can change a recording
channel in the recording pause mode. (You cannot change a
recording channel in the DVD recording pause mode.)
Recording one program while watching another
While the unit is recording, press TV/VIDEO to select the TV position.
The "TV" icon in display window will light up and recording will con-
tinue. Select the TV channel you want to watch by using the TV channel
selector.