Replace Tv Station Positions; Manual Tv Station Presetting - Sharp DV-RW270S Operation Manual

Setting a channel

Replace TV station positions

You can replace the channel positions as you like.
Example: Replace the TV station No. 6 with position
No. 2.
1
Select "CH TUNING" and press ENTER.
CH
SKIP
DECODER
2
Select "CH" and press ENTER. Then select the
moving channel position number (6) and press EN-
TER.
CH
SKIP
DECODER
MOVE
3
Select "MOVE" and press ENTER.
CH
SKIP
DECODER
MOVE
4
Select the channel position number (2) that the se-
lected position at step 2 above is to be moved and
press ENTER. Then these channel positions will
be replaced with each other.

Manual TV station presetting

The Automatic station presetting function (See page
27) memorises the available broadcasts to suitable CH
positions.
Some broadcasts may not be preset correctly by the
automatic tuning system, in this case you can preset
the broadcast stations manually.
Example: Presetting a station on program position 5.
1
Select "CH TUNING" and press ENTER.
CH
SKIP
DECODER
2
Select "CH" and press ENTER. Then select the
channel position number (5) and press ENTER.
CH
SKIP
DECODER
MOVE
28
GB
1
OFF
OFF
6
OFF
OFF
6
6
OFF
OFF
6
1
OFF
OFF
5
OFF
OFF
5
3
Select "TUNING" (tuning scale) and press ENTER.
CH 5
SKIP OFF
OFF
DECODER
MOVE 5
TUNING
4
Press A (Upper frequency) or B (Lower frequency)
once. The search starts. It stops at each broadcast
automatically. ("A" changes to "
repeatedly until the desired station appears. If the
broadcast is too weak (eg. with a drifting picture),
the search will not stop. If you want to stop, press
C/D or B/A.
CH 5
SKIP OFF
DECODER OFF
MOVE 5
TUNING
SEARCH F. TUNE
ENTER
ENTER RETURN BACK
5
If the tuned-in picture is not good enough, press C
or D until the picture is acceptable. Then press EN-
TER.
6
Repeat the steps 2 and 5 to preset other TV sta-
tions.
NOTE:
Occasionally, the auto search might find a weak signal
and stop. If the TV station signal is weak, you shouldn't
store this station. Press B or A to restart the auto
search. The unit will not to store this station.
GUIDE CH SET
See page 54.
") Press B or A
SETUP END