Autel MaxiBAS BT609 Manual
Hide thumbs Also See for MaxiBAS BT609:

Advertisement

Quick Links

Trademarks
®
Autel
, MaxiSys
are trademarks of Autel Intelligent Technology Corp., Ltd., registered in
China, the United States and other countries. All other marks are
trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission
of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on
the latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specifications, functions, and
illustrations.
Autel will not be liable for any direct, special, incidental, indirect damages or
any economic consequential damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support
pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
Support@autel.com
For technical assistance in all other markets, please contact your local
selling agent.
®
®
, MaxiDAS
, MaxiScan
®
, MaxiCheck
1
®
, and MaxiRecorder
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MaxiBAS BT609 and is the answer not in the manual?

Questions and answers

Summary of Contents for Autel MaxiBAS BT609

  • Page 1 All information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Autel reserves the right to make changes at any time without notice. While information of this manual has been carefully checked for accuracy, no...
  • Page 2: Safety Information

    Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device.
  • Page 3: Safety Instructions

    Safety Instructions The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.
  • Page 4 This tool can also perform various service and maintenance tasks. There are three main components to the MaxiBAS BT609:  MaxiBAS BT609 Tablet –the central processor and monitor for the system;  MaxiBAS B200 Tester – the battery tester with the clamp cable;...
  • Page 5 MaxiBAS Tablet Back View Loudspeaker Camera Camera Flash MaxiBAS Tablet Top View USB OTG/Charging Port USB Host Port 10. Micro SD Card Slot 11. Power/Lock Button Technical Specifications Item Description Operating System Android 9.0 Memory 2GB RAM & 64GB On-board Memory Display 7.0 inch TFT-LCD with 1280 x 800 resolution &...
  • Page 6 Item Description  Wi-Fi (IEEE 802.11 a/b/g/n/ac 1x1) Connectivity  BT 5.0+EDR+BLE  USB 2.0 (1 USB HOST + 1 USB OTG)  Micro SD Card (Support up to 128GB) 8 Megapixel Camera Sensor Ambient Light Sensor (ALS)  Audio Microphone Input/Output ...
  • Page 7 Power Button Status LED Power LED USB Port Multimeter Cable Port Battery Clamp Cable Technical Specifications Description Item  USB 2.0, Type C Connectivity  Bluetooth V3.0 BR/EDR+ V4.2 LE Dual-Mode Input Voltage 5V DC Working Current < 150 mA at 12V DC CCA Range 100 to 3000A Voltage Range...
  • Page 8: Other Accessories

    3. MaxiVCI V200 Lighting Push Button Power LED Vehicle/Connection LED Vehicle Data Connector (16-pin) USB Port Other Accessories Battery Side Post Terminal Type S x2 Connects the battery posts and the clamps Battery Side Post Terminal Type T x2 Connects the battery posts and the clamps Power Adapter Together with the USB cable, connects the unit to an external DC power port for power supply.
  • Page 9: Getting Started

    Long press the Lock/Power button to turn on the BT609. The first time you use the device, a message will pop up asking you to register the device. Follow on- screen instructions to create an Autel ID and complete the registration. Software & Firmware Update ...
  • Page 10 on-screen instructions to check the firmware version and update the VCI to the latest version. Establish Vehicle Communication Connect the VCI to the vehicle’s DLC (OBD II port), which is generally located under the vehicle dash. Follow on-screen instructions to connect the VCI to the app on your device via Bluetooth pairing.
  • Page 11: Service Procedures

     Email: support@autel.com  Address: 6th-10th floor, Building B1, Zhiyuan, Xueyuan Road, Xili, Nanshan, Shenzhen, 518055, China AUTEL NORTH AMERICA  Phone: 855-AUTEL-US (855-288-3587) Monday-Friday 9am-6pm EST  Website: www.autel.com  Email: ussupport@autel.com  Address: Suite 200, 175 Central Avenue, Farmingdale, New York, USA.
  • Page 12: Repair Service

    Address: 155 Islington Street, Melbourne, Collingwood, VIC Repair Service If it becomes necessary to return your device for repair, please contact us first and then download the repair service form from www.autel.com, and fill it in. The following information must be included: ...
  • Page 13: Compliance Information

    Compliance Information FCC Compliance FCC ID: WQ8MAXIBASBT609 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 14 WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation.
  • Page 15 RoHS COMPLIANCE This device is declared to be in compliance with the European RoHS Directive 2015/863/EU. CE COMPLIANCE This product can be used across EU member states. We declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Table of Contents