Table of Contents
Advertisement
Quick Links
Trademarks
OTOFIX is a trademark of Autel Intelligent Technology Corp., Ltd.,
registered in China, the United States, and other countries. All other marks
are trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise without the prior written permission
of Autel Intelligent Technology Corp., Ltd.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on
the latest information available at the time of printing.
Autel Intelligent Technology Corp., Ltd. reserves the right to make changes
at any time without notice. While information of this manual has been
carefully checked for accuracy, no guarantee is given for the completeness
and correctness of the contents, including but not limited to the product
specifications, functions, and illustrations.
Autel Intelligent Technology Corp., Ltd. will not be liable for any direct,
special, incidental, indirect damages or any economic consequential
damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support
www.otofixtech.com
(833) 686-1349 (OTO-1FIX) (North America)
0086-755-86147779 (China)
support@otofixtech.com
For technical assistance in all other markets, please contact your local
selling agent.
i
Advertisement
Table of Contents
Related Manuals for Autel OTOFIX BT1
Summary of Contents for Autel OTOFIX BT1
- Page 1 Autel Intelligent Technology Corp., Ltd. will not be liable for any direct, special, incidental, indirect damages or any economic consequential damages (including the loss of profits).
- Page 2 Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device.
- Page 3 The safety messages herein cover situations Autel Intelligent Technology Corp., Ltd. is aware of. Autel Intelligent Technology Corp., Ltd. cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.
-
Page 4: Table Of Contents
SAFETY INSTRUCTIONS ................. ii USING THIS MANUAL ................1 1.1 C ..................1 ONVENTIONS GENERAL INTRODUCTION ..............3 2.1 OTOFIX BT1 B ............. 4 ATTERY ESTER 2.1.1 Function Description ..............4 2.1.2 Power Sources ................5 2.1.3 Technical Specifications ............... 6 2.2 OTOFIX V1 —... -
Page 5: Safety Information
5.1 T ................25 ROCEDURE 5.2 T ..................26 ESULTS BATTERY REPLACE ................27 BATTERY RESET .................. 29 7.1 A ) ......29 EGISTRATION AFTER BATTERY REPLACEMENT 7.1.1 BMS Reset .................. 29 7.1.2 Electric Appliance Reset ............. 30 7.2 S ................ - Page 6 REMOTE DESKTOP ................52 REGISTER TOOL ................. 54 14.1 R ..............54 EGISTRATION VIA ESTER 14.2 R EGISTRATION VIA AN NTERNET ROWSER ON A OMPUTER OR OBILE ..................... 54 EVICE MAINTENANCE AND SERVICE ............55 15.1 M .............. 55 AINTENANCE NSTRUCTIONS 15.2 T ............
-
Page 7: Using This Manual
Using This Manual This manual contains device usage instructions. Some illustrations shown in this manual may contain modules and optional equipment that are not included in your system. Contact your sales representative for availability of other modules and optional tools or accessories. - Page 8 Important IMPORTANT indicates a situation which, if not avoided, may result in damage to the test equipment or vehicle. Example: IMPORTANT Keep the cable away from heat, oil, sharp edges and moving parts. Replace damaged cables immediately. Hyperlink Hyperlinks, or links, that take you to other related articles, procedures, and illustrations are available in electronic documents.
-
Page 9: General Introduction
The OTOFIX BT1 uses a technology called Adaptive Conductance to more accurately determine the health of battery than traditional battery testers. The OTOFIX BT1 can quickly display both voltage and health status of the existing battery, register a new battery, and perform advanced battery and electrical diagnostics. -
Page 10: Otofix Bt1 Battery Tester
OTOFIX BT1 Battery Tester 2.1.1 Function Description Figure 2-1 OTOFIX BT1 Front/Back/Side View Multimeter Cable Port Battery Clamp Cable Port Micro SD Card Slot Thermal Printer Paper Exit Power LED — refer to Table 2-1 Power LED Description for details Ambient Light Sensor —... -
Page 11: Power Sources
Do not charge the battery when the temperature is below 0° C (32° F) or above 45° C (113° F). Internal Battery Pack The OTOFIX BT1 is powered via its internal rechargeable battery, which can provide sufficient power for about 6 hours of continuous operation if fully charged. -
Page 12: Technical Specifications
2.1.3 Technical Specifications Item Description Operating System Android 9.0 Screen Display 5.5'' LCD touchscreen with 720x1280 resolution Storage 32 GB Wi-Fi (802.11 a/b/g/n/ac) Connectivity USB 2.0, Type C BT 5.0 + EDR Camera 8 Megapixel Input Voltage 5 V DC Working Current <... -
Page 13: Function Description
NOTE The OTOFIX V1 may or may not be included in your package(s) depending on your order. If this VCI device is not included in your package(s) and you need one, please contact your local distributor or OTOFIX customer service. 2.2.1 Function Description Vehicle Data Connector (16-pin) Flashlight Power Button... -
Page 14: Power Sources
Color Description Solid Green: VCI is connected via USB cable. Green Flashing Green: VCI is communicating via USB cable. Vehicle Connection Solid Blue: VCI is connected via Bluetooth. Blue Flashing Blue: VCI is communicating via Bluetooth. 2.2.2 Power Sources The VCI device can receive power from following sources: Vehicle Power... -
Page 15: Other Accessories
Supply Current 150 mA @ 12 V DC Operating Temperature -10°C to 50°C (14 ° F to 122 ° F) Storage Temperature -40°C to 80°C (-40 ° F to 176 ° F) 89.89 mm (3.53”) x 46.78 mm (1.84”) x 21 mm Dimensions (L x W x H) (0.82”) Weight... -
Page 16: Getting Started
3.1 Power Up Press and hold the Lock/Power button on the left side of the tester to switch the unit on. The system will boot up and display the Main Menu. Figure 3-1 Sample OTOFIX BT1 Tester Main Menu... -
Page 17: Page Indicator And System Status Bar
Status Bar Application Buttons Page Indicator 3.1.1 Page Indicator and System Status Bar Descriptions of icons on the status bar and page indicator are displayed below (Table 3-1). Table 3-1 System Status Icons and Page Indicator Icon Name Description Indicates the position of the current page in a list of pages. - Page 18 Button Name Description Operation guide for battery replacement. Battery Replace See Battery Replace on page 27. Accesses the Battery Reset function. Battery Reset See Battery Reset on page 29. Activate Purchases Diagnostics function. Pro Function See Activate Pro Function on page 33. Only displays with valid subscription.
-
Page 19: Drop-Down Menu
3.1.3 Drop-down Menu Swipe down from the top of the screen to access the drop-down menu. Here, users can quickly change some of the most commonly-used settings and functions with a tap. Descriptions of these buttons are displayed below (Table 3-3). -
Page 20: Power Off
Connect the clamp cable to the clamp cable port on the tool and tighten the connector of the clamp cable. Press and hold the Lock/Power button to turn on the OTOFIX BT1. Select the desired function and follow the on-screen instructions. - Page 21 Connect the red clamp to the positive (+) terminal and the black clamp − to the negative ( ) terminal of the battery.
-
Page 22: In-Vehicle Test
In-vehicle Test In-vehicle Test is used for testing batteries that are installed in a vehicle. An in- vehicle test includes battery test, starter test, and generator test. These tests help determine the health status of the battery, the starter, and the generator. IMPORTANT A Disclaimer page will appear when accessing any function on the Home screen for the first time. -
Page 23: Vci Connection
Buttons Table 4-1 Upper Toolbar Buttons Name Button Description Back Returns to the previous screen Home Returns to the Home Screen Displays the battery connection status. The number on the icon indicates the real-time Battery voltage of the tested battery. In the battery test, Connection the button will turn green if the battery is good;... - Page 24 Figure 4-2 Sample VCI Manager Screen Tap the icon to return to the previous screen. The tab will move to the Vehicle information screen. The VCI button on the top right corner of the screen displays a green check mark, indicating the tester is connected to the VCI.
- Page 25 Buttons Name Button Description After the VCI is connected to the device through the vehicle’s OBD Data Link Connector (DLC), AutoVIN turn on the ignition. The vehicle’s VIN number will automatically be recognized. Scan Tap to scan license plate. License Scan VIN Tap to scan Vehicle Identification Number (VIN).
-
Page 26: Battery Test
Tap the icon on the tab to return to the Vehicle information screen. Tap Battery Location on the bottom left corner of the screen and review the battery location diagram. Locate the battery, check the battery information on it, and select the correct battery parameters on the screen. - Page 27 Figure 4-6 Sample Battery Test Result Screen Process Buttons Test Report Function Buttons Process Buttons Tap any of the process buttons to advance to the corresponding test — battery test, starter test or generator test. A status icon will display on the bottom right corner of the button, indicating the test results.
-
Page 28: Starter Test
Function Buttons The Function Buttons at the bottom of the screen vary depending on the operation. Functions include Report and Replace Battery. The table below provides a brief description of the Function Buttons operations: Name Description Tap to view the test data and results in report form. Tap Print on the bottom of the screen to print the test report to the built- Report in thermal printer. -
Page 29: Generator Test
Table 4-3 Starter Test Results Result Description Cranking Normal The starter is good Current Too Low Low momentary discharge capacity Voltage Too Low Low battery storage capacity Not Started The starter is not detected for starting 4.4 Generator Test 15. Follow the on-screen instructions to complete the test. The test results will display as follows: Figure 4-8 Sample Generator Test Result Screen... - Page 30 Table 4-4 Generator Test Results Result Description Charging Normal The generator is good. The belt linking the starter and the generator is loose; Output Too Low The cable linking the starter and battery is loose or corroded. The generator is not properly connected to the ground;...
-
Page 31: Out-Vehicle Test
Out-Vehicle Test Out-vehicle Test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only. The compatible battery types and standards are as follows: Types: FLOODED, AGM, AGM SPIRAL, EFB, and GEL Standards: CCA, SAE, CA, EN, EN2, IEC, DIN, JIS, MCA, BCI, and GB 5.1 Test Procedure... -
Page 32: Test Results
Figure 5-2 Sample Out-vehicle Test Results Screen 5.2 Test Results Icons are color-coded to indicate status. Result Description Good Battery Battery meets required standards. Battery is good, but low on charge. Fully charge Good & Recharge the battery. Check for causes of low charge. Battery requires charge to determine its condition. -
Page 33: Battery Replace
Battery Replace The Battery Replace function guides you to replace the battery step by step. The battery replacement process includes Battery Type Suggestion, Preparation, Battery Replacement steps, New Battery Test and Battery Registration. To replace the battery: Tap the Help button at the bottom of each screen to read all the help information carefully before operation, then follow the on-screen instructions to complete the battery replacement. - Page 34 Figure 6-2 Sample New Battery Test Results Screen When the new battery test is completed, tap Next to automatically proceed to Auto Registration in the Battery Reset section.
-
Page 35: Battery Reset
Battery Reset The Battery Reset allows users to access the following functions: Auto registration (after battery replacement), BMS reset, Electric appliance reset, Special function and Battery usage history. Figure 7-1 Sample Battery Reset Main Menu Screen 7.1 Auto Registration (after battery replacement) Auto registration is often used after the successful installation of a new battery, including BMS reset and Electric appliance reset. -
Page 36: Electric Appliance Reset
Figure 7-2 Sample BMS Reset Menu Screen After choosing the desired battery replacement registration, information of Scene, Condition, Influence and Note will display. Click Next to complete registration. 7.1.2 Electric Appliance Reset When the vehicle power is interrupted in order to replace the battery, and a memory saver has not been used, position settings on some vehicle components will be lost. -
Page 37: Special Function
Figure 7-3 Sample Electric Appliance Reset Screen 7.2 Special Function The special function varies by vehicle make. Functions other than battery reset are categorized as special functions. Please follow the on-screen instructions to perform the desired function. Figure 7-4 Sample Reset Closed-circuit Current Monitoring Cycle Screen (BMW vehicles) -
Page 38: Battery Usage History (Only For Bmw Vehicles)
7.3 Battery Usage History (only for BMW vehicles) The Battery usage history function will display the following three tests: SOC (State of Charge) in the last 5 days: monitors the SOC status and diagnoses the health status of the battery. Proportion of SOC duration: displays battery usage habits of drivers. -
Page 39: Diagnostics (Subscription Only)
Diagnostics (subscription only) NOTE The Diagnostics function can only be accessed with a valid subscription. To subscribe to the Diagnostics function: 1. Go to Activate Pro Function on the Home screen. 2. Read Note of Successful Upgrade carefully before tapping the Upgrade button. -
Page 40: Auto Scan
Display VCI connection. Choose live data parameters by selecting appropriate checkbox. (Available on Live data screen) 8.1 Auto Scan The Auto scan function performs a comprehensive scan of all the ECUs in the vehicle to detect faults and retrieve DTCs. ... -
Page 41: Control Units
The indicators are defined as follows: Fault | #: Fault indicates detection of fault code(s); # indicates the quantity of detected faults. Pass | no fault: indicates the system has completed the scanning process with no fault detected. Column 4 — to perform further diagnosis or testing on a specific system item, tap the arrow button to the right of that item to display the Function menu screen. -
Page 42: Ecu Information
Figure 8-2 Sample Function Menu Screen The Function menu options may vary by vehicle. The Function menu may include: ECU information Read codes Erase codes Live data Freeze frame To perform a diagnostic function： Establish communication with the test vehicle. -
Page 43: Read Codes
Figure 8-3 Sample ECU Information Screen 8.2.2 Read Codes This function retrieves and displays the DTCs from the vehicle’s control system. The Read codes screen varies by each vehicle model being tested. The availability of freeze frame data for viewing varies by vehicle. -
Page 44: Erase Codes
Figure 8-4 Sample Read Codes Screen Main Section Code section — displays the retrieved codes from the vehicle. Description section — describes the retrieved codes in detail. Status section — indicates the status of the retrieved codes. Snowflake icon — indicates freeze frame data is available for viewing. Selecting this icon will display a data screen, which looks and functions similar to the Read codes screen. - Page 45 To erase codes: Tap Erase codes on the Function menu. A message warning that DTCs and/or freeze frame data will be deleted will display: Tap Yes to continue. A confirmation screen will display when the operation is successful. Tap No to exit. Tap ESC on the confirmation screen to exit Erase codes.
-
Page 46: Multimeter
Multimeter The multimeter (sold separately) is a multi-function, multi-range measuring instrument. Connect the multimeter to the OTOFIX BT1 and access its application directly from the home screen to perform AC/DC voltage, AC/DC current, and resistance measurements, and diode, and connectivity tests. The test results will be displayed in number or graph. -
Page 47: Getting Started
the circuit. After current measurement is finished, turn off the power to the circuit before removing the test leads and before reconnecting any disconnected wires or devices. Do not add voltage to the input terminal when measuring resistance. ... -
Page 48: Screen Layout And Operation
Figure 9-1 Sample Multimeter Connection Schematic 9.3 Screen Layout and Operation Tap the Multimeter icon on the main menu to view the multimeter page. -
Page 49: Multimeter Icon
① ② Figure 9-2 Sample Multimeter Test Screen ④ Multimeter icon Digital display Main view section Measurement type selection 9.3.1 Multimeter Icon The Multimeter status icon indicates the connection status with the tester. A green check mark means that the tester and the multimeter are connected; a red “X”... -
Page 50: Measurement Type Selection
9.3.4 Measurement Type Selection This multimeter can be used to measure AC voltage, DC voltage, resistance, AC electricity, DC electricity, diode, and connectivity. The measurement types include: Icon Name Description AC voltage Measures the voltage in the electrical circuit. DC voltage Measures the resistance of the electrical circuit Resistance or the component. - Page 51 Figure 9-3 Sample Schematic Diagram of Current Clamp...
-
Page 52: Update
Update This function allows you to update your OTOFIX BT1 software through Wi-Fi connection, including software for operating system, applications, battery testing, battery registration, and vehicle manufacturers. A notification displays when updates are available. Ensure the tool is connected to a stable Wi-Fi network and follow the on-screen instructions to update software. - Page 53 Upper Toolbar Button Description Returns to the previous page. Tap to acquire all software. Search Bar Searches for updates by vehicle manufacturer. Main Section Left Column — displays vehicle logos. Middle Column — displays the newest software version for update and information of the size and release date of the update package.
-
Page 54: Settings
Access the Settings menu to adjust default settings and view information about the OTOFIX BT1 system. Option Description VCI Manager is for connecting the OTOFIX BT1 with a VCI device via Bluetooth. This option allows you to VCI manager pair the tester with the VCI device, check the communication status, and upgrade the VCI firmware. -
Page 55: Data Manager
Data Manager The Data Manager application allows you to store, print, and review the saved files, manage workshop information and customer information records, and keep test vehicle history records. There are six main functions available. 12.1 Test Records This option stores records of test vehicle history, including battery tests and diagnostics. -
Page 56: Workshop Information
12.2 Workshop Information The Workshop Information form allows you to input, edit, and save detailed workshop information, such as shop name, address, phone number, and other remarks, which, when printing vehicle diagnostics reports and other associated test files, will display as the header of the printed reports. 12.3 Image The Image option is a JPG database containing all captured screenshots. - Page 57 NOTE Thermal Paper The internal printer is shipped with two rolls of thermal paper (2.3’’ wide by 0.98’’ in diameter). Replacement rolls are available in most stationery stores. To replace the paper roll: Open the cover of the printer by gently lifting it upwards. Remove the spent roll if any.
-
Page 58: Remote Desktop
You can use the application to receive remote support from OTOFIX support center, colleagues or friends by allowing them to control your OTOFIX BT1 tester on their PC via the TeamViewer software. - Page 59 (http://www.teamviewer.com). Start the software on his/her computer at the same time in order to provide support and take control of the OTOFIX BT1 remotely. Provide your ID to the partner and have them to send you a remote control request.
-
Page 60: Register Tool
Visit http://pro.otofixtech.com/. If you already have an Autel account, sign In with your account ID and password; if you are a new member to Autel, click on the Create Autel ID button on the screen to create an ID. The online system will send a verification code to the registered email address. -
Page 61: Maintenance And Service
Maintenance and Service To ensure that the tester and the combined VCI unit perform at their optimum level, we advise that the product maintenance instructions covered in this section are read and followed. 15.1 Maintenance Instructions The following shows how to maintain your devices, together with precautions to take. -
Page 62: Troubleshooting Checklist
15.2 Troubleshooting Checklist A. When the tester does not work properly: Make sure the tester has been registered online. Make sure the system software and diagnostic application software are properly updated. Make sure the tester is connected to the Internet. ... -
Page 63: Service Procedures
DANGER The built-in Lithium-ion Polymer battery is factory replaceable only; incorrect replacement or tampering with the battery pack may cause an explosion. Do not use a damaged battery charger. Do not disassemble or open, crush, bend or deform, puncture or shred. ... -
Page 64: Repair Service
Web: www.otofixtech.com Phone: (833) 686-1349 (OTO-1FIX) (Monday-Friday 9am-6pm EST) Address: 175 Central Avenue, Suite 200, Farmingdale, New York, USA 11735 OTOFIX CHINA HQ Email: support@otofixtech.com Website: www.otofix.cn Phone: 0086-755-2267-2493 (Monday-Friday, 9:00AM-6:00PM Beijing Time) Address: 7th, 8th and 10th floor, Building B1, Zhiyuan, Xueyuan Road, Xili, Nanshan, Shenzhen, 518055, China For technical assistance in other markets, please contact your local... -
Page 65: Compliance Information
Compliance Information FCC Compliance FCC ID: WQ8BATSTB2022 WQ8BATSTBV200 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. - Page 66 The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.
-
Page 67: Warranty
Limited One Year Warranty Autel Intelligent Technology Corp., Ltd. (the Company) warrants to the original retail purchaser of this OTOFIX BT1 that should this product or any part thereof during normal usage and under normal conditions be proven defective in material or workmanship and results in product failure within 1 year period from the date of purchase, such defect(s) will be repaired, or replaced (with new or rebuilt parts) with Proof of Purchase, at the Company’s... - Page 68 IMPORTANT All contents of the product may be deleted during the process of repair. You should create a back-up copy of any contents of your product before delivering the product for warranty service.
Need help?
Do you have a question about the OTOFIX BT1 and is the answer not in the manual?
Questions and answers