Menu Settings - Baofeng G11S User Manual

6.3 Menu settings

6.3.1 Receiving with Privacy Codes (RXCODE) - MENU 01
You can configure different Receiving Privacy Codes for each channel. The selected Privacy Code may be different for each
channel.
Note: Selecting a Privacy Code of "OFF" will disable the Privacy feature. To communicate between two G11S radios, all radios
in your group must be set to the same channel and Privacy Code selections.
The Receiving Privacy Codes setting steps are as follows:
1> Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU 01.
2> Press [MENU] key again to enter the RXCODE menu;
3> Press [+UP]/[-DOWN] key to select the Privacy Code, and the selection range is OFF / 67.0~754N.
Note: The state of the Privacy Code is off, and the display is OFF. When the display is OFF, press the [+UP] key to select
CTCSS with priority, range 67~254.1Hz (50 groups in total); when the display is OFF, press the [-DOWN] key to select DCS
with priority, range D754I-023N (104 groups in total).
During the selection process, Pressing and holding the [+UP]/[-DOWN] key to quickly search for the sub-tone code.
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.3.2 Transmitting with Privacy Codes (TXCODE) --- MENU 02
You can configure different transmission Privacy Codes for each channel. The selected Privacy Code may be different for each
channel.
Note: Selecting a Privacy Code of "OFF" will disable the Privacy feature. To communicate between two G11S radios, all radios
in your group must be set to the same channel and Privacy Code selections.
The transmission Privacy Codes setting steps are as follows:
1> Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU 02.
2> Press [MENU] key again to enter the TXCODE menu;
3> Press [+UP]/[-DOWN] key to select the Privacy Code, and the selection range is OFF / 67.0~754N.
20