How To Charge; Led Indicator - Baofeng G11S User Manual

2.3 How to Charge

Your radios include a charging cradle and battery packs. Follow these instructions to recharge your radios.
Make sure to turn the radio OFF before placing the radio in the charging cradle.
1) Connect the adapter's plug to DC IN 10V jack of the charging cradle and plug the other end into an AC outlet.
2) Set the charging cradle on the desk or tabletop and place the radio in the charging cradle with the keypad facing forward.
3) Make sure that the LED illuminates. Charge the battery pack for 6 hours and remove the radio from the charging cradle
after charging.
Note:
• Use only the supplied battery and AC adapter or approved accessories from BAOFENG.
• Charge time may vary depending on the battery life remaining.
• The battery must be installed for the unit to operate, even if the unit is also connected to external power.
• If battery power is low, you cannot operate the radio even using external power. Allow the battery to charge before using. If
you try to transmit while power is low, the radio will automatically turn off.
• For fastest charging, turn off the radio before charging.

2.4 LED Indicator

NOTE：Trouble means battery too warm, battery short-circuited or charger short-circuited.
STATUS
No Battery
Charge Normally
Fully Charged
Trouble
LED
Green and red alternately flashing
Red
Green
Red blinks fast for a long time
8