Baofeng G11S User Manual page 24

Note: The state of the Privacy Code is off, and the display is OFF. When the display is OFF, press the [+UP] key to select
CTCSS with priority, range 67~254.1Hz (50 groups in total); when the display is OFF, press the [-DOWN] key to select DCS
with priority, range D754I-023N (104 groups in total).
During the selection process, Pressing and holding the [+UP] / [-DOWN] key to quickly search for the sub-tone code.
4> Press [MENU] key to confirm;
5> Press [PTT] or[A/B] key to exit the menu mode.
6.3.3 Squelch level (SQL) - MENU 03
This function turns on the Squelch when the signal is strong; the Squelch will stay off when the signal is weak. Set the same
DCS codes of your group and turn on the squelch.
By setting the level too high, you may not receive the weak signals; while by setting it too low you may receive noises or
undesired signals.
NOTE: This transceiver has 10 (0-9) available levels: 0 means that the Squelch is turned on. From level 1 to level 9 you will
have different levels of noises reduction.
The higher is the level, the louder will be the Squelch.
The steps for setting the squelch level are as follows:
1> Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU 03.
2> Press [MENU] key again to enter the SQL menu;
3> Press [+UP]/[-DOWN] key to select the squelch level, select the range 0, 1-9
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.3.4 Backlight intensity (LIGHT) - MENU 04
The LCD backlight is convenient for you to use at night or in a dark environment. The LCD backlight setting steps are as
follows:
1> Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU 04.
2> Press [MENU] key again to enter the LIGHT menu;
3> Press [+UP]/[-DOWN] key to select the LCD backlight switch, and the selection range is ON/OFF/KEY;
21