Baofeng G11S User Manual page 28

2> Press [MENU] key again to enter the VOICE menu;
3> Press [+UP]/[-DOWN] key to OFF or Chinese and English selection, the selection range is OFF/CHI/ENG
Note: OFF-turn off the voice prompts function; CHI-prompt voice is Chinese; ENG-prompt voice is English.
After turning off the voice prompt function, there will be a beep prompt when you select a channel or menu setting.
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.3.13 Restore factory settings (RESET)-MENU 13
Your G11S radio has a reset function. To reset the radio, proceed as follows:
1>Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU 13, the screen displays
RESET.
2> Press [MENU] key to confirm, and the radio resets the parameters.
6.3.14 Wide/Narrow bandwidth (WN) - MENU 14
This function is used to set the working bandwidth of the radio. You can choose between wide or narrow bandwidth.
To set the working bandwidth of the radio, proceed as follows:
1>Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU 14, the screen displays 14
W/N.
2> Press [MENU] key again to enter the W/N menu;
3> Press [+UP]/[-DOWN] key to select the Wide or Narrow bandwidth；
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
Note: The broadband is 25KHz, and the narrowband is 12.5KHz. On channels 8-14, this function cannot be modified.
25