Baofeng G11S User Manual page 27

2> Press [MENU] key again to enter the TOT menu;
3> Press [+UP] / [-DOWN] key to select the transmission time limit, the selection range is OFF/30S/60S/90S/120S/150S/180S;
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.3.10 Busy channel lockout (BCLO) - MENU 10
When this function is active, if you select a busy channel and press the PTT, the transceiver will not transmit.
1> Press [MENU] key to enter the main menu, press the [+UP]/[-DOWN] key to enter the MENU 10.
2> Press [MENU] key again to enter the BCLO menu;
3> Press [+UP]/[-DOWN] key to select the switch and select the range ON/OFF;
4> Press [MENU] key to confirm;
5> Press [PTT] or [A/B] key to exit the menu mode.
6.3.11 Call Tone Select (RING)- MENU 11
This setting will allow you to transmit a unique Call Tone alert to identify your radio when you transmit messages. You can
select from one of 10 different Call Tone signals. To Set Call Tone:
1> Press [MENU] key to enter the main menu, press [+UP]/[-DOWN] key to enter the MENU 11.
2> Press [MENU] key again to enter the RING menu;
3> Press the [+UP]/[-DOWN] key to select a different Call Tone. An example of each call tone will sound for 1.5 seconds.
Note: OFF-turn off the call reminder tone; during the selection of 1-10, you can listen to the call tone.
Before you initiate a voice intercom, you can press the [CALL] key to remind the call.
4> Press [MENU] again to confirm;
5> Press [PTT] or [A/B] key to exit the menu and return to normal operation mode.
6.3.12 VOICE Selection (VOICE) - MENU 12
Your G11S radio has voice prompt function for channel and function operation, you can choose to switch voice function or
prompt language type. The setting steps are as follows:
1> Press [MENU] key to enter the main menu, and press [+UP]/[-DOWN] key to enter the MENU 12.
24