Can Add-On - Jäger ADwin-Gold-USB Manual

CAN add-on

32
9 CAN add-on
The add-on Gold-CAN is equipped with several additional interfaces that are
configured and operated individually:
– 4 SSI decoders (page 33)
The decoders can be used for the connection of incremental encoders
with SSI interface. All inputs are differential and designed for RS422/485
level (5V).
The decoder inputs are located on the connectors CO1...CO4, where
the inputs of the CO1 add-on can also be found.
– 2 CAN interfaces (page 35)
Depending on your requirements, you can order both interfaces either
as high-speed or low-speed version. Switching in operation is not pos-
sible.
The inputs of the CAN 1 interface are located on the connectors
CAN 1.1 and CAN 1.2, those of the CAN 2 interface on the connector
CAN 2.
– 2 RSxxx interfaces (page 39)
Both interfaces can be configured separately per software to be operat-
ed as RS232 or RS485.
The interface inputs are located on the connectors COM1 and COM2.
The add-on Gold-CAN is only available in combination with the Gold-D option.
ADwin-Gold USB / ENET, manual version 3.8, October 2005
ADwin