Safety - Husqvarna 524LK Operator's Manual

Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
This product complies with applicable EC
Directives.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
The product can cause objects to eject,
which can cause injury.
Maximum speed of the output shaft.
Keep a minimum of 15 m distance to
persons and animals during operation of
the product.
Only use flexible cutting wire. Do not use
metal cutting equipment for grass
trimming.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
4
Used if there is a risk of
Used if there is a risk of
The arrows show the limit for the handle
position.
Air purge bulb.
Choke.
Fuel.
Noise emissions to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Noise control) Regulation
2017". Noise emission data can be found
on the machine label and in the
data chapter.
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.

Safety

Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
instructions that follow before you use the
product.
• A clearing saw, brushcutter or trimmer can be
dangerous if used carelessly or incorrectly and can
cause serious injury or death to the operator or
others. It is extremely important that you read and
understand the contents of this operator's manual.
Technical
The rating plate shows the
serial number. yyyy is the
production year, ww is the
production week.
Read the warning
1309 - 004 - 23.03.2021