Operating Instructions; Before Using The Cooktop; Setting The Controls - LG LSCE365ST Service Manual

Ceramic glass radiant cooktop

Hide thumbs Also See for LSCE365ST:

Owner's manual (65 pages)

Specifications (2 pages)

Operating instructions manual (8 pages)

Table Of Contents

Table of Contents

BEFORE USING THE COOKTOP

Before using the cooktop for the first time, clean it thoroughly with the included cleaner or

ceramic cooktop cleaner according to the Care and Cleaning instructions in this guide. This will

help protect the ceramic surface and make future cleanup easier.

CAUTION: Never use scrub pads, abrasive or etching cleaners. They can cause

permanent damage to the cooktop surface.

SETTING THE CONTROLS

To operate the touch control pads, touch the pad firmly with the flat part of your fingertip.

FIRST OPERATION

The first time that power is supplied to the cooktop, the display for the controls lights for 1

seconds.

If you don't turn on the cooktop within 1 hour after power is supplied to the cooktop, the display

for the controls blinks.

ACTIVATING THE COOKTOP

To turn ON the cooktop, touch the POWER ON/OFF pad for approximately 2

seconds.

The indicator above the pad will light.

To turn OFF the cooktop, touch the POWER ON/OFF pad. The indicator light above

the pad will turn off.

NOTE: After turning on the cooktop with the POWER ON/OFF pad, you must select one of the

Cooking Zones within 15 seconds using the Cooking Zone ON pad(s). If no selection is made,

the cooktop will turn off for safety.

SELECTING THE COOKING ZONE

To select the desired Cooking Zone, touch the ON pad.

The display for the selected Cooking Zone will light.

The power level indicator lights are blinking but no power level is set

NOTE: Once the Cooking Zone has been selected with the ON pad, the power level must be

selected within 10 seconds with the Element power settings. Otherwise, the Cooking Zone will

turn off for safety.

Only for training and service purposes