Setting The Controls (Cont.) - LG LSCE365ST Service Manual

SETTING THE CONTROLS (cont.)

SETTING THE POWER LEVEL
The power level for the selected Cooking Zone can be set from 1 to 9.
To select the power level:
Select the number on the element power settings for the active Cooking Zone to
adjust the power level from 1 to 9.
Selecting 7 will activate the Cook Zone. After activating the Cook Zone, the
indicator lights will flash once and lock your selection.
NOTE: If power level is not selected, the Cooking Zone will turn off after 10 seconds.
To readjust the power level:
Select Cooking Zone ON.
To change the Cooking Zone power, select the desired level. If power level is not selected
after 10 seconds, the Cooking Zone power level will remain the same.
To turn OFF the Cooking Zone:
After the cooking is complete, touch the OFF pad to turn off the Cooking Zone.
The corresponding cooking zone display will turn off.
If the POWER ON/OFF pad is selected, all Cooking Zones will shut off.
WARNING: Your cooktop has a residual heat indicator for each Cooking
Zone.
This indicator will warn that this area has been used and is
still giving off enough heat to cause burns.
Avoid touching the Cooking Zone when this indicator is shown.
Although the cooktop is OFF, the light will stay lit until the cooktop has cooled
down.
LGE Internal Use Only
OPERATING INSTRUCTIONS
- 25 - Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes