Operating Instructions; Using The Surface Burners - LG LSCG366ST Owner's Manual

USING THE SURFACE BURNERS

Throughout this manual, features and appearance may vary from your model.
• Make sure all grates on the cooktop are properly
placed before using any burner.
• Be sure the burners and grates are cool before you
place your hand, a pot holder, cleaning cloths or
other materials on them.
HOW TO LIGHT A GAS SURFACE BURNER
• Be sure all the surface
burners are placed in their
respective positions.
• Push the control knob in and
turn it to the LITE positions.
• You can hear a little
CLICKING noise-the sound
of the electric spark igniting
the burners.
• To control the flame size, turn the knob.
lf the knob stays at LITE, it will continue to click.
• When turning a burner to LITE, all the burners spark.
Do not attempt to disassemble or clean around any
burner while another burner is on. An electric shock
may result, which could cause you to knock over hot
cookware.
The medium(left front & rear) and the large(right front)
burners are the primary burners for most cooking.
These general-purpose burners can be turned down
from HI to LO suit a wide range of cooking needs.
The extra large burner (center) is the maxium output
burner. Like the other four burners, it can be turned
down from HI to LO for a wide range of cooking
appliances.
This burner is also designed to quickly bring large
amount of liquid to a boil.
It has a special UtraHeat
setting designed to be used
with cookware 10 inches or
large pots / pans or use with
the griddle.
The extra large burner(dual)
can also be turned down to
LO for a low simmer setting
almost like the small burner.
O P E R AT I N G I N S T RU C T I O N S
• Make sure all burners are in place.
• Do not operate the burner for an extended period of
time without cookware on the grate.
The finish on the grate may chip without cookware
to absorb the heat.
SEALED GAS BURNERS
Your cooktop has five
sealed gas burners.
They offer convenience,
cleanability and
flexibility to be used in
a wide range of cooking
applications.
The smallest burner is
Push the control knob in and
in the right rear.
turn it to the LITE position.
These burners can be turned down to LO for a very
low simmer setting.
They provide precise cooking performance for
delicate foods such as sauces or food that requires
low heat for a long cooking time.
IN CASE OF POWER FAILURE
In case of a power failure, you can light the gas
surface burners on your cooktop with a match.
Hold a lit match to the burner, then push in and turn
the control knob to the LITE position.
Use extreme caution when lighting burners this way.
Surface burners in use when an electrical power
failure occurs will continue to operate normally.
Extra-large
burner only
Extra Large (dual)
Small
Medium
Large
7