Westfalia TMK-006 Instruction Manual page 16

Electric multi hedge trimmer
Hide thumbs Also See for TMK-006:
Table of Contents

Advertisement

Available languages

Available languages

Use only extension cables which are approved for outdoor operation. Use
approvable extension cable with a cable quality of H07 RN-F; 3-1.5 mm2. Ask
your electrician.
For using the unit, we recommend the use of an RCD with a residual current
< 30 mA. In Switzerland the utilisation of an RCD is obligatory.
The blades are very sharp. Do not touch the blades during use and keep
fingers, hair, clothing and similar objects away from the blades.
Do not attempt to remove cut material from the blades or to hold material to
be cut when the blades are running. Remove jammed material from the
blades after switching off and unplugging. A moment of inattention while
operating the hedge trimmer may result in serious personal injury.
Keep the blades always sharp and clean. Replace defective or completely
worn blades with original parts only.
Do not force the trimmer while cutting. Allow to hedge trimmer to work at the
rate for which it was designed.
Have sufficient rests!
Use the extension pole only for operating the hedge trimmer. Do not operate
other units with the extension pole.
Attention! When using the hedge trimmer with the extension pole, only
connect the extension cable with the plug of the extension pole. Never insert
the plug of the hedge trimmer directly into the plug of the extension cable.
Should the unit become damaged do not use it and have it repaired by a
professional or contact our customer support department. Do not disassemble
the unit or try repairing it yourself.
Safety Notes
Disconnect plug from mains before cleaning,
inspection or maintenance work!
Do not expose to rain.
Keep bystanders out of the danger zone.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

34 18 26

Table of Contents