Chicco 06620 Instructions For Use Manual page 37

ce's charger. Follow the instructions in this manual to
recharge the lithium battery.
on - Keep the battery and the battery contacts clean
NG: and dry. In the event that the contacts become
ons. dirty, clean the terminals with a soft, dry cloth. Do
not use abrasives, chemicals or solvents to clean
the battery and its contacts.
FOR - Lithium batteries require charging prior to
use. Always refer to the instructions for correct
charging procedures.
ries. - Do not keep charging the lithium battery when
nals. not in use.
way - Keep the instructions manual for future
nals reference.
be - Always remove the Lithium battery from the
product when not in use.
heir - Dispose of properly according to the information
in this manual.
fire.
5.1 Installing Alkaline batteries not included in
ical the baby unit (primarily in transmitter mode)
heck Remove the Alkaline battery compartment
fore closing panel (14), placing your finger near the
ium top groove and and gently pulling the panel
outward (fig.1).
ery, Insert two 1.5 V Alkaline AAA/L03 batteries,
yes respecting the proper insertion polarity as
ted indicated in the battery compartment.
ical Reposition the Alkaline battery compartment
closing panel (14), first inserting the lower panel
ally hooks in their battery compartment housing and
gently pushing the panel toward the product
ium (fig.2).
oper
5.2 Replacing Alkaline batteries not included in
om the baby unit (primarily in transmitter mode)
Remove the Alkaline battery compartment
ach closing panel (14), placing your finger near the
top groove and and gently pulling the panel
and outward (fig.1).
ium Remove the two 1.5 V Alkaline AAA/L03
rity batteries and replace them with 2 similar 1.5V
ium AAA/LR03 batteries, taking care to respect the
proper insertion polarity as indicated in the
rent battery compartment. Reposition the Alkaline
the battery compartment closing panel (14), first
e is inserting the lower panel hooks in their battery
compartment housing and gently pushing the
nder panel toward the product (fig.2).
pter
arge
tery
5.3 Installing the lithium-ion battery supplied
with the parent unit (primarily in receiver
mode)
Upon purchase, the 3.7V 800mAh rechargeable
lithium-ion battery (18) in the parent unit is kept
separately in the product packaging.
Carefully remove the lithium-ion battery from
its packaging.
Remove the rechargeable battery compartment
closing panel (14), placing your finger near the
top groove and and gently pulling the panel
outward (fig.3).
Insert the lithium-ion battery (18), respecting
the proper insertion polarity as indicated in the
battery compartment.
Reposition the
compartment closing panel (14), first inserting the
lower panel hooks in their battery compartment
housing and gently pushing the panel toward the
product (fig.4).
5.4 Replacing the lithium-ion battery supplied
with the parent unit (primarily in receiver
mode)
If the duration of the rechargeable lithium-ion
battery is reduced excessively, this means that it
has run out and therefore must be replaced (this
is to be considered normal because rechargeable
batteries run out over time).
Remove the rechargeable battery compartment
closing panel (14), placing your finger near the top
groove and and gently pulling the panel outward
(fig.3). Remove the run out rechargeable battery
(18) and replace with another rechargeable
battery that is identical to the 3.7V 800mAh
supplied with the product (code20256500100 o
be requested directly from Artsana S.p.A.) taking
care to place them with the correct insertion
polarity indicated on the battery compartment.
Reposition the
compartment closing panel (14), first inserting the
lower panel hooks in their battery compartment
housing and gently pushing the panel toward the
product (fig.4).
37
rechargeable battery
rechargeable battery