Chicco 06620 Instructions For Use Manual page 31

. If Press
s of loudspeaker (11) volume and select the desired
fied level.
The unit offers up to 10 volume setting levels. The
nto factory set volume level is 5.
not Press the "+" button (6) to increase one level.
Press the "-" (6) button once to decrease one
level.
and
ent
Note: The volume adjustment icon includes 5
nds. notches: each notch lights up after 2 presses of
will the +/- button (6).
A beep will be heard each time volume is
increased or decreased by a level.
egin A double beep will be heard each time the
e maximum or minimum level is met.
ting
unit. Parent/baby unit communication Talk Function
een The 'talk' function makes it possible for parents
and to communicate with the child when the unit is in
een. Baby Monitor mode.
Press and hold the button (4) and talk near the
until parent unit microphone (10).
hes When the talk function is on, it is not possible
ode) to hear sounds from the baby unit on the parent
unit.
hing
ode. ATTENTION: when using the 'Talk' function, avoid
talking too close to the parent unit microphone
der (10) or the baby unit will receive very high
intensity sounds.
or 1 ATTENTION: do not press the talk button (4)
when the two units are in the same room or are
less than 3 metres apart; doing so could cause
more noises or a hissing sound.
h on
Vibration Alarm function
or 1 This function is activated in Baby Monitor mode
from the internal parent unit menu.
the When medium-high intensity sounds come
from the baby unit, the unit begins to vibrate,
allowing the parent to be notified when the level
unit of loudspeaker (11) volume on the parent unit is
set to a minimum.
late When this function is set, the
unit on the display.
itor
For setting details, see Paragraph 3.2.1.
+ and – (6) to regulate parent unit
The change in the volume level will
be shown on the display (5)
Voice Activation function
In Baby Monitor mode, the parent unit can
operate in continuous transmission mode or in
voice activation mode.
The Voice Activation function is activated from
the internal parent unit menu.
The parent unit loudspeaker (11) interrupts the
reproduction of any sounds emitted from the
child that are below the factory set default voice
activation threshold, while all sounds above the
threshold are reproduced.
When this function is set, the
on the display.
For setting details, see Paragraph 3.2.2.
Reminder Setting
To help organise the family's days, it is possible
to set 5 acoustic reminders for meals, fever
measuring, medicine, diaper change and sleep
from the internal parent unit menu. This function
is available both when the unit is in Baby Monitor
or Reminder mode.
When reminders are set, the display shows the
relative icons
For setting details, see Paragraph 3.2.4.
After activation of each reminder, a countdown
starts until a warning beep is heard relative to the
reminder expiry. The beep is also accompanied on
the display by a flashing relative reminder icon.
The beep will last 10 seconds followed by a
5 minutes pause, during which the icon will
continue to flash on the display.
This cycle will continue until the reminder is
deactivated via pressing the button (7).
Luminous
indicators:
· The power and link indicator light (12) supplies 3
different pieces of information:
- Indication that the device is on in Baby Monitor
mode and properly connected to baby unit:
the indicator light (12) will light up steady green.
- Indication of loss or absence of link with the
icon is shown baby unit during operation in Baby Monitor mode:
the indicator light (12) lights up green, starts to
flash and the display (5) shows the icon
after 1 seconds, 2 consecutive beeps per second
31
icon is shown
and acoustic operating status
and,