Chicco 06620 Instructions For Use Manual page 34

Activation menu, you decide to exit and return
to the main menu without saving any settings,
press the navigation back button (9) for about 2
seconds.
3.2.3 Date and Time setting
To set the current date and time, press the button
(7). The Alarm icon will begin to flash on the
display (5)
Press the navigation buttons (8-9) until the
icon flashes. Confirm the your selection by
pressing the button (7).
The display will show the date and time pre-set by
the manufacturer.
The numbers related to the days will begin to
flash. To set the current day, press the navigation
forward button (8) several times. The numbers
relative to the day will increase progressively.
Confirm the day with the button (7).
The numbers related to the months will begin to
flash automatically on the display.
To set the current month, press the navigation
forward button (8) several times. The numbers
relative to the month will increase progressively.
Confirm the month with the button (7).
The numbers related to the hour will begin to
flash automatically on the display.
To set the current hour, press the navigation
forward button (8) several times. The numbers
relative to the hour will increase progressively.
Confirm the hour with the button (7).
The numbers related to the minutes will begin to
flash automatically on the display.
To set the current minutes, press the navigation
forward button (8) several times. The numbers
relative to the minutes will increase progressively.
Confirm the minutes with the button (7).
You will automatically exit from the menu (5).
The set date and time will appear.
Note:
If an impossible date is set (e.g. 30-02-2011), a
double beep will be heard and the row related
to the date will begin to flash at the end of the
setting procedure.
Note:
To set the date and time, only use the navigation
forward button (8). Press the navigation back
button (9) to move the cursor backward one
position.
Note: If during navigation within the Date and
Time setting menu, you decide to exit and return
to the main menu without saving any settings,
press the navigation back button (9) for about 2
seconds.
3.2.4 Reminder setting menu
To set the reminders to be set and activated, press
the button (7). The Vibration alarm icon will begin
to flash on the display (5).
Press the navigation buttons (8-9) until the
icon flashes. Confirm the your selection by
pressing the button (7).
You now access the Reminder Selection menu.
The following reminders can be set:
· meal reminder
· measure fever reminder
· medicine reminder
· diaper change reminder
· sleep reminder
The Meal reminder icon will begin to flash on the
display (5). To display icons for other reminders,
press the navigation buttons (8-9) until the
desired reminder icon flashes. Confirm your
selection via the button (7).
Note: If during navigation within the Reminder
Selection menu, you decide to exit and return to
the main menu without saving any settings, press
the navigation buttons (8-9) until the icon is
displayed Confirm with the button (7).
Setting and activating the selected Reminder
The possibility to select between "ON", ("ON"
flashes if the reminder function was previously
set) and "OFF" ("OFF" flashes if the reminder
function was not previously set) will appear
34
on
rem
but
The
rem
The
flas
forw
rela
Con
The
flas
To
forw
rela
Con
The
flas
To
forw
rela