Chicco 06620 Instructions For Use Manual page 32

are heard. As soon as the link is restored, the beep
will switch off and the display (5) will show the
icon and the indicator light (12) will light up
steady green.
NOTE: when the parent unit switches on, it
searches for the channel to link with the baby
unit; therefore the indicator light (12) will flash
green and the display will show the icon
link is established.
- Indication that the unit is off in Baby Monitor
mode or on in Reminder mode.
the indicator light (12) will switch off.
· The rechargeable lithium-ion battery status
indicator light (13) supplies 3 different pieces of
information:
-Indication that the rechargeable battery (18) is
almost flat:
the indicator light (13) lights up red, starts to
flash and the display (5) shows a flat battery
icon and, at the same time, a beep is heard
each second.
If you want to continue using the device, it is
advisable to charge the rechargeable lithium-
ion battery (18); otherwise, the device will stop
working. Charge the rechargeable lithium-ion
battery (18) by connecting the mains adapter (1)
to the parent unit power and charger connector
(19). When charging starts, the beep will switch
off.
-Indication that the rechargeable battery (18)
is charging: when charging begins, the indicator
light (13) switches on steady red and the display
shows the icon of a battery with its internal
notches switching on in succession.
Leave the battery to charge until the indicator
light (13) switches off and until the icon
display remains steady.
The parent unit can still be used to monitor
sounds made by the child while the rechargeable
battery is charging, but the time required to reach
full charge will be longer.
-Indication that the rechargeable battery is
charged or of operation via mains adapter (1)
without rechargeable battery:
the indicator light (13) will switch off.
· Lit level indicator bar for sounds emitted by the
child (3):
Illuminates progressively
outward, indicating 3 levels of sound intensity
coming from the baby unit (primarily in
transmitter mode) microphone (8)
Allows parents to monitor sounds emitted by the
child even when the parent unit (11) loudspeaker
volume is switched off.
sounds emitted by the child are of a relatively
low intensity.
until a emitted by the child are of medium intensity.
emitted by the child are of a relatively high
intensity.
Display of Temperature detected by the baby
unit sensor
In Baby Monitor mode, the parent unit display (5)
will show the temperature detected by the baby
unit sensor (9).
Under 16° and over 26°, the numbers related
to measured temperature will begin to flash. In
this case, it is recommended to set the correct
temperature level in the child's room.
Headphones
It is possible to use the supplied headphones (20)
to listen to sounds emitted from the child from
the parent unit. To activate this listening mode,
simply connect the headphone (20) jack to the
audio output (17) on the base of the parent unit.
3.Parent unit internal Menu Management in
Baby Monitor mode
3.1 Accessing the main menu
The parent unit includes a navigation menu,
through which it is possible to set up, activate and
on the deactivate the parent unit in Baby Monitor mode.
The features included are:
· Vibration Alarm
· Voice Activation Function
· Date and Time setting
· 5 Reminders
Press the button (7) to access the main menu and
choose the functions you are interested in using
by pressing the navigation buttons (8-9).
from the centre
32
: the central LED lights up if
: 3 LEDs light up if sounds
: 5 LEDs light up if sounds
To c
men
Sett
the a
To e
butt
pres
Not
seco
6 se
men
(5) w
unti
3.2 S
3.2.1
Acti
Acce
Vibr
disp
butt
The
flash
"OF
prev
the
butt
auto
will
a sh
Dea
Acce
The
disp
The
flash
"OF
prev