Chicco 06620 Instructions For Use Manual page 26

MAINS ADAPTERS.
DO NOT WET MAINS ADAPTERS, THE Baby
unit OR PARENT UNIT. DO NOT EXPOSE TO
HUMIDITY OR ATTEMPT TO OPEN THEM. THIS
MAY BE A SOURCE OF DANGER AND SHALL
VOID THE WARRANTY.
1. Configuration & Features
This monitoring device, created with DECT digital
transmission technology, can be used as an aid in
child monitoring in the home. This baby monitor
includes a baby unit (primarily in transmitter
mode) and a parent unit (primarily in receiver
mode).
Both these devices use DECT digital transmission
technology to establish a radio connection that
allows the sending and receiving of sound.
1.1 System features
Main system features include:
• Voice transmission via DECT digital technology
system.
• Outdoor operating range of about 330 metres
without obstacles*.
*The maximum operating range is about about
330 metres in an open field with no obstacles
and with fully charged batteries (the range,
however, could be reduced substantially within
a home, depending on particular environmental
conditions, layout of walls and furniture
in the home and the presence of metallic
structures, external and internal interference/
electromagnetic fields, concrete walls or between
rooms on different floors or because batteries are
not fully charged, etc.).
1.2 Baby unit
(primarily in transmitter mode)
Model 06620
1. Power via 100-240V ~ 50/60Hz /6V
500mA mains switching adapter or via two 1.5V
AAA /LR03 Alkaline batteries (not included)
2. On/Off button
3. Night light On/Off button
4. Lullaby On/Off/Selection button
5. Nightlight
6. Baby unit loudspeaker +,- Volume Adjustment
Button
7. Baby unit +,- Volume adjustment button
8. Microphone
9. Temperature sensor
10. Loudspeaker for the reproduction of sounds
coming from the parent unit in Baby Monitor
mode or music in Music mode.
11. Audio input
12 . Power and link indicator light:
(a)Steady green: linked with parent unit
(b)Flashing green: absence of or loss of link with
parent unit
(c) OFF: baby unit off in Baby Monitor mode or
on in Music mode.
13. Alkaline battery status indicator light:
(a) Flashing red: Alkaline batteries almost flat
(b) OFF: Alkaline batteries charged or operation
via mains adapter (1)
14. Alkaline battery compartment closing panel
15. Baby unit power connector
16. Audio cable
1.3 Parent unit (primarily in receiver mode)
Model 06620
1. Power via supplied rechargeable 3.7V 800mAh
lithium-ion battery or via 100-240V ~ 50/60Hz
/6V 500mA mains switching adapter
2. On/Off button
3. Lit level indicator bar for sounds emitted by
the child
4. Button to activate parent-child communication
("TALK" function)
5. 1.6" LCD display
6. Parent unit loudspeaker +,- volume adjustment
buttons
7. Internal menu and confirmation selection
access button
8. Navigation Forward button
9. Navigation Back button
10. Microphone
11. Built-in loudspeaker for sound reproduction
of sounds emitted by the child in Baby Monitor
mode.
This performs the following additional functions
at the same time:
a) Absence of or loss of link between child and
parent unit signal function: approx. 10 seconds
after the power and link indicator light starts to
flash green, you will hear 2 consecutive beeps per
second. As soon as the link with the baby unit is
restored, the signal switches off and the power
and link indicator light will light up steady green.
b) Rechargeable lithium-ion battery status almost
flat signal function:
you will hear 1 beep per second and the
rechargeable lithium-ion battery status indicator
26
ligh
Wh
batt
rech
up s
c)
12.
(a) S
(b)F
bab
(c) O
on i
13.
indi
(a)F
(b)
in p
(c)
ope
batt
14.
pan
15.
16.
17. A
18.
batt
500
19.
lithi
20.
1.4
In B
In R
Bab
(on