Table of Contents
Advertisement
Whirlpool UK Appliances Ltd
DISMANTLING INSTRUCTIONS
Safety Notes
1.
Before carrying out any work ensure that the appliance is disconnected from the mains
supply
2.
Carry out insulation resistance, continuity and functional tests on appliance after service.
3.
Personal safety precautions must be taken to protect against accidents caused by sharp
edges on metal, glass and plastic parts.
Note: - All repairs are easier to perform with the oven door removed.
1)
Removal of Oven Door
a) To remove the door, open it fully (a) and lower the catches until they are in the unlock position (b).
b) Close the door as much as you can.
Take a firm hold of the door with both hands - do not hold it by the handle.
Simply remove the door by continuing to close it (a) while pulling it upwards at the same time (b)
until it is released from its seating. Put the door to one side, resting it on a soft surface.
a
c) Refit the door by moving it towards the oven, aligning the hooks of the hinges with their seating and
securing the upper part onto its seating.
d) Lower the door and then open it fully. Lower the catches into their original position (a): Make sure
that you lower them down completely (b). Apply gentle pressure to check that the catches are in the
correct position.
e) Try closing the door and check to make sure that it lines up with the control panel. If it does not,
repeat the steps above. The door could become damaged if it does not work properly.
a
Service Manual UK
b
b
37 of 43
~15°
a
"CLICK"
English
b
Advertisement
Table of Contents
