Demo Mode - Hotpoint SI5854PIX Service Information

Whirlpool UK Appliances Ltd

DEMO MODE

In this state the user interface allows an interactive navigation that represents the oven features.
All loads are switched off. The only load that is managed is the oven lamp.
How to Activate the DEMO MODE
1. Disconnect the oven from the mains supply and wait approximately 10 seconds.
2. Reconnect the oven to the mains supply.
3. Press the ON/OFF and TEMPERATURE buttons simultaneously and hold them for 5 seconds.
For confirmation a beep will sound and the whole display lights up. Release the touch buttons.
4. The DEMO MODE can be set within the first minute after switching on only.
5. After the DEMO MODE has been activated, the time has to be set.
How to Deactivate the DEMO MODE
1. To deactivate the DEMO MODE, press the ON/OFF and TEMPERATURE button simultaneously
again and hold them for 5 seconds. A confirmation 2 beeps will sound. Release the touch buttons.
NOTE: In the event of a power failure of the product, the display will stay in DEMO MODE and a long
beep will remind you that the DEMO MODE is active.
Service Manual UK
36 of 43
English