FLIR E30 Step-By-Step Manual

How to upgrade your FLIR E40 to E60 (Resolution hack)
Step-by-Step Guide:
1 Download Flir Tools or drivers from
2 Install FLIR Tools on to your computer (If this applies)
3 Turn on your Flir E30, E40 or E50 Camera
4 Connect your Flir camera to your computer using the USB-Cable, and let windows install the
needed drivers.
5 After windows has completed installing all drivers, disconnect your camera from the USB-Cable
6 Press navigation pad/button (2) with a push in the center "The menu system bar will appear"
7 From the menu system bar select push left on the navigation pad to toggle to Settings/Options
(11)
8 Press navigation pad/button (2) with a push down to enter " Settings"
9 Press navigation pad/button (2) with a push down to scroll down to " Device settings"
10 Press navigation pad/button (2) with a push right to enter " Device settings menu"
11 Press navigation pad/button (2) with a push down to scroll down to " Camera Information"
12 Press navigation pad/button (2) with a push right to enter " Camera Information menu"
www.flir.com