Service And Support Manager Getting Started Wizard; Updating The Systems Director Management Console; Managing Power Systems Firmware - IBM SDMC Troubleshooting, Service, And Support

2. On the IBM IDs page, provide a user ID that is registered with the Electronic Service Agent. If you
do not have an IBM ID, you can register at http://www.ibm.com/registration. You can designate a
user ID as a primary IBM ID and another user ID as a secondary IBM ID.
3. Click OK.

Service and Support Manager Getting Started wizard

Learn how to open the Service and Support Manager Getting Started wizard using the IBM Systems
Director Management Console (SDMC interface.
To open the Service and Support Manager Getting Started wizard, perform the following steps:
1. From the main IBM Systems Director Welcome page, select Settings.
2. From the main Settings page, select Service and Support Manager Getting Started Wizard. Follow
the instructions in the wizard to configure call-home.

Updating the Systems Director Management Console

To install updates on IBM Systems Director Management Console (SDMC), click Update IBM Systems
Director Management Console link at the top of the welcome page to download and install updates
from IBM Fix Central. If SDMC is not connected to the Internet, you can copy the update files manually
to your management server, and then import and install the updates by using the SDMC web interface.
For more information, see Updating the SDMC.
Tip: To protect your system in the event of an unforeseen complication, ensure that you back up your
data before performing any update tasks.

Managing Power Systems firmware

Use this task to manage firmware on Power Systems servers.
For more information, see Managing Power
40
Troubleshooting, service, and support using SDMC
®
system firmware.