Inserting Coins - V-ZUG Coin System 1 Operating Instructions Manual

... Your appliance
Display messages
On using for the first time, a short system test is carried out automatically.
– The current software version, e.g.
– If the credit is zero,
– If the decimal point is flashing in the display, power is being drawn by the appli-
ance and being deducted from the credit.
– If the credit falls below the
in the display. If the credit is exhausted, the appliance switches off auto-
matically.
– If the coin box is full,

Inserting coins

Model 245
Coins are inserted in the coin/token slot.
A
– The current credit is shown in the display.
Model 246
Select desired appliance.
A
– The display with the current credit flashes for
5 seconds.
Insert coins while the display is flashing.
A
– The current credit is shown in the display.
8
/
is shown in the display.
warning threshold, then this alternates with
is shown in the display.
, is shown in the display.