V-ZUG Coin System 1 Operating Instructions Manual page 17

... Settings
Model 246 (appliance 2)
Parameter
time-dependent operation
time-dependent operation
usage-dependent operation
usage-dependent operation
Current response threshold
Shut-off delay time
Function
Operating mode
appliance 2
Unit for
appliance 2
Tariff for
appliance 2
Unit for
appliance 2
Tariff for
appliance 2
appliance 2
Power display
appliance 2
there are pauses during a programme sequence (gaps in the power
appliance 2 being drawn). As soon as there is a gap that is greater than the set
Description
For setting the operating mode to
time dependent (0)
or usage dependent (1) operation
Defines the length of time (e.g. 1 hour)
during which the tariff in P33 is valid.
Charge for (e.g. 1 hour) washing/
drying according to time defined in P32.
Defines the length of time (e.g. 1 hour)
during which the tariff in P35 is valid.
Charge for (e.g. 1 hour) washing/
drying according to time defined in P34.
Changing the current response threshold determines the level of
power consumption from which charging begins.
Shows actual power consumption. This parameter cannot be
changed. If a value greater than 1.0 A is measured,
Depending on the washing machine or tumble dryer connected,
shut-off delay time (end of programme), charging is ended.
is displayed.
17