Table of Contents
Advertisement
Settings buttons
▸ Open the coin box cover.
– The settings buttons are located
above the coin box. Features depend
on the model.
1 Settings button «+»
2 Settings button «–»
3 Enter/Exit the settings at
«SET»
Display messages
When using for the first time, a short system test is carried out automatically.
– The current software version, e.g.
– If the credit is zero,
– If the decimal point is flashing in the display, power is being consumed by the ap-
pliance and being deducted from the credit.
– If the credit falls below the
in the display. The appliance switches off automatically when the credit
has run out.
– When the coin box is full,
3
Operation
3.1
Inserting coins
Enough coins have to be inserted for a complete drying programme.
Model 245
▸ The coins are inserted in the coin/token slot.
– The current credit is shown in the display.
Model 246
▸ Select required appliance.
– The display with the current credit flashes for 5 seconds.
/
is shown in the display.
warning threshold, then this alternates with
is shown in the display.
1 2 3
, is shown in the display.
3 Operation
7
Advertisement
Table of Contents
