V-ZUG Coin System 1 Operating Instructions Manual page 13

Settings
Different settings (parameters) can be set for the appliance. This is described below
for both models.
Depress the «SET» settings key for about 3 seconds.
A
– appears in the display (model 245).
– appears in the displays (model 246).
Press the «+» or the «–» settings key to toggle between the parameters.
A
Press the «SET» settings key to select a parameter.
A
Use the «+» or «–» settings key to change the value.
A
Press the «SET» settings key to accept the value.
A
– The setting is saved.
To exit, depress the «SET» settings key for about 3 seconds.
A
It is possible to exit the settings without saving if:
no settings key is pressed for one minute,
a coin is inserted,
or an appliance is selected (model 246).
Depending on the setting, only the relevant parameters that can be changed are
shown.
Example: With the setting for token operation, the parameters
(CHF and EUR) are not visible.
to
13