Lighting With A Match Or Barbecue Lighter - Paderno VIDA Essence Series User Manual

Operation
14

Lighting with a match or barbecue lighter

1. Open the lid.
2. ALL control knobs must be set to "0" / "OFF".
3. Gas supply must be "Closed."
4. SLOWLY, open the LP cylinder valve counterclockwise. Wait 15 seconds for pressure to stabilize.
5. To match-light, follow the order outlined in the diagram below. Begin with burner #1. Push in and turn the control knob
counterclockwise to #10 setting / (
2 Burner
1st
6. Position a barbecue lighter or a match, inserted into the match holder, through the lighting hole on the left and right side of the burner
box. Verify that the burner is lit (see image A1 and A2).
A1
7. Repeat steps 5 and 6 to light remaining burners.
8. OVEN MODE ONLY: Push in and turn the TempASSURED Technology™ control knob counterclockwise from BBQ Mode to the
desired oven temperature: 225°F to 450°F (107.2°C to 232.2°C).
ATTENTION- 4-BURNER MODEL ONLY:
IN OVEN MODE: BURNERS #2 AND #3 ARE NOT OPERATIONAL. BURNERS MUST BE LEFT IN THE "0"/ "OFF" POSITION.
IN BBQ MODE ONLY: WHEN LIGHTING BURNERS #2 AND #3, YOU MUST HOLD FOR 5 SECONDS TO PREVENT THE BURNER FLAME
FROM EXTINGUISHING.
) max. position.
4 Burner
2nd
1st 3rd
A2
4th 2nd