Oven Mode Lighting Instructions - Paderno VIDA Essence Series User Manual

Operation

Oven Mode lighting instructions -

Only use the far left and far right burners in Oven Mode (
Before lighting
1. Open the lid.
2. ALL control knobs must be set to "0" / "OFF."
3. Gas supply must be "Closed."
4. SLOWLY, open the LP cylinder valve counterclockwise. Wait 15 seconds for pressure to stabilize.
A1
A2
5. Push in and turn both lighting burner control knobs counterclockwise to the # 10 setting / (
6. Press the electronic ignition button. If the burners do not light, turn the control knobs to the "0"/ "OFF" position and wait five minutes to
allow the gas to clear, before attempting to light again or follow match lighting instructions.
7. Push in and turn the TempASSURED Technology™ control knob counterclockwise to the desired oven temperature and close the
lid. Preheat for 10 minutes (depending on ambient temperature) before positioning food on the grill (see image B).
B
Turn TempASSURED Technology™
control knob counterclockwise .
).
TIP: Before setting the TempASSURED Technology™ control
knob, ensure that your lighting burner control knobs are set to
#10 setting / (
ATTENTION: TO CHANGE THE TEMPASSURED OVEN SETTING, YOU WILL NEED
TO PUSH IN AND TURN THE CONTROL KNOB EACH TIME, TO SET THE DESIRED
TEMPERATURE. WHEN THE KNOB IS RELEASED THE TEMPERATURE IS LOCKED.
IMPORTANT – 4-BURNER MODEL ONLY:
IN OVEN MODE ( ), BURNER #2 AND BURNER #3 WILL NOT FUNCTION. BURNERS
MUST REMAIN IN THE "0" / "OFF" POSITION.
BURNER #2 AND BURNER #3 INCLUDE A THERMOCOUPLE AND SAFETY SHUT-OFF
VALVE THAT WILL RESTRICT THE USE OF BOTH BURNERS WHEN THE TEMPASSURED
CONTROL KNOB HAS BEEN TURNED TO OVEN MODE (
WHEN SWITCHING FROM OVEN MODE TO BBQ MODE.
TO LIGHT BURNERS #2 AND #3, YOU MUST PUSH IN AND TURN CONTROL KNOBS
COUNTERCLOCKWISE TO THE #10 SETTING/ MAX. POSITION AND HOLD FOR 5
SECONDS TO ALLOW THE THERMOCOUPLE TIME TO HEAT UP.
) max. position, for best performance.
) max. position (see image A1 and A2).
).
paderno.com | 1-800-263-9768
13