Bbq Mode Lighting Instructions - Paderno VIDA Essence Series User Manual

Operation
12

BBQ Mode lighting instructions

All burners will function in BBQ Mode. The control knob must be in BBQ Mode (
Before lighting
1. Open the lid.
2. ALL control knobs must be set to "0" / "OFF."
3. Gas supply must be "Closed."
4. SLOWLY, open the LP cylinder valve counterclockwise. Wait 15 seconds for pressure to stabilize.
A1
A2
5. Push in and turn both lighting burner control knobs counterclockwise to the # 10 setting / (
6. Press the electronic ignition button. If the burners do not light, turn the control knobs to the "0"/ "OFF" position and wait five minutes to
allow the gas to clear before attempting to light again or follow match lighting instructions.
7. 4-BURNER MODEL ONLY. To light burners #2 and #3, you must push in and turn control knobs counterclockwise to the
) max. position and hold for 5 seconds to allow the thermocouple time to heat up (see image B).
#10 setting / (
ATTENTION: IF YOU RELEASE THE CONTROL KNOB TOO SOON, THE BURNER FLAME FOR BOTH BURNER #2 AND BURNER #3
WILL EXTINGUISH.
B
).
) max. position (see image A1 and A2).