Case - BMW F 800 GT Rider's Manual

switching off the ignition to re-
duce the strain on the onboard
electrical system. Additional
devices with low power con-
sumption are possibly not de-
tected by the vehicle electron-
ics. In these cases, onboard
sockets are already switched
off shortly after the ignition is
switched off.
In case of insufficient battery
voltage, the onboard sockets
are switched off to maintain the
ability to start the motorcycle.
If the maximum loadability
specified in the technical data
is exceeded, the onboard
sockets are switched off.

Case

Opening case
with case OA
Turn key 1 to position
Pull gray release lever 2
OPEN
( ) upward and
simultaneously open case lid.
Closing case
OA
with case
OPEN
. Turn key 1 to position
Press catches 2 of case lid into
retainers 3. Ensure that no lug-
gage is trapped between lid
and case.
Pull gray release lever 4
OPEN
( ) upward and
simultaneously close case lid.
The lid clicks audibly into place.
Turn key 1 in case lock in the
direction of travel and remove.
Removing case
with case
OPEN
.
OA
10
123
z