BMW F 800 GT Rider's Manual page 114

9
112
Pull glass on screw connection
side out of mirror housing.
z
Remove light source 1 from
the light housing by turning it
counterclockwise.
Install front and rear turn
indicator light sources
Replace defective light source.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
To protect glass on new bulb
against contamination, always
use a clean, dry cloth to hold it;
do not touch with bare fingers.
Install light source 1 in light
housing by turning it clockwise.
Insert inside end of lens into
light housing and close.
Fit the screw 1.