Synchronizing; Battery - BMW F 800 GT Rider's Manual

Logon ended
5
The logon is ended in the follow-
ing situations:
60
4 remote controls have been
logged on.
Ignition is switched off.
No button was pressed for 30
seconds after the ignition was
switched off.
No button was pressed for 30
seconds after a remote control
was logged on.
After the logon is completed, the
z
LED flashes and the acknowledg-
ment tone sounds three times.

Synchronizing

with anti-theft alarm system
(DWA) OE
When is it necessary to
synchronize the remote
control?
The remote control must be syn-
chronized when the buttons of
the remote control has been op-
erated more than 256 times out-
side the range of the receiver.
In this case, the receiver on the
motorcycle no longer reacts to
the signals of the remote control.
Synchronize remote
control
Press and hold button 1 and
button 2.
LED flashes for ten seconds.
As soon as the LED goes out,
release the 1 button and the 2
button.
LED lights up.
Actuate the 1 button or the 2
button.
LED goes out.
Remote control is synchro-
nized.

Battery

with anti-theft alarm system
OE
(DWA)
When is a battery change
required?
The batteries of the remote
control must be replaced after
2–3 years. A weak battery can
be recognized from the fact that
the LED does not light up at all
or only briefly when a button is
pressed.