Running In - BMW F 800 GT Rider's Manual

The self-diagnosis routine
is determining whether
BMW Motorrad ASC is ready for
operation. The self-diagnosis
routine runs automatically when
you switch on the ignition.
Phase 1
Check on system components
monitored by the diagnostic sys-
tem while vehicle is parked.
ASC indicator and warning
light flashes slowly.
Phase 2
The diagnostic system evaluates
status of monitored system com-
ponents while vehicle is under-
way (at least 3.1 mph [5 km/h]).
ASC indicator and warning
light flashes slowly.
ASC self-diagnosis
completed
The ASC indicator and warning
light goes out.
Check the display of all indica-
tor and warning lights.
An ASC error is indicated follow-
ing completion of the ASC self-
diagnosis routine.
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.

Running in

Engine
In the period preceding the
initial inspection attempt to
change rpm and engine load as
frequently as possible, avoiding
extended periods at constant
rpm.
Choose curvy, slightly hilly sec-
tions of road if possible.
Observe the engine run-in
speeds.
Engine run-in speed
-1
<5000 min (Mileage
0...746 miles (0...1200 km))
no full throttle (Mileage
0...746 miles (0...1200 km))
Observe mileage, after which
the running-in check should be
performed.
Mileage until first
running-in check
311...746 miles
(500...1200 km)
7
75
z