BMW F 800 GT Rider's Manual page 35

even after the critical situation
has passed.
ASC self-diagnosis not
completed
with Automatic Stability Control
OE
(ASC)
ASC indicator and warning
light flashes slowly.
Possible cause:
The self-diagnosis routine was
not completed; the ASC function
is not available. The engine must
be running and the motorcycle
must be moving at a speed of at
least 3.1 mph (5 km/h) in order
for ASC self-diagnosis to com-
plete.
Ride off slowly. It must be
noted that the ASC function
is not available until the self-
diagnosis has been completed.
ASC switched off
with Automatic Stability Control
(ASC) OE
ASC indicator and warning
light lights up.
Possible cause:
The ASC has been deactivated
by the rider.
Switch ASC on.
ASC error
with Automatic Stability Control
(ASC) OE
ASC indicator and warning
light lights up.
Possible cause:
The ASC control unit has de-
tected an error.
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able. Observe additional infor-
mation on special situations
which can lead to ASC fault
codes ( 86).
Have the malfunction corrected
as soon as possible at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
DWA battery drained
with anti-theft alarm system
OE
(DWA)
General warning light shows
yellow.
DWA
+ " " is indicated.
NOTICE
This fault message is only shown
for a short time immediately fol-
lowing the Pre-Ride-Check.
3
33
z