BMW F 800 GT Rider's Manual page 34

reading when the temperature
3
drops below this threshold for
the first time.
32
Engine heat can lead to spuri-
ous readings of ambient tem-
perature when the motorcycle
is stationary. When the effects
of engine heat on the monitored
temperature become excessive
the display responds by tem-
porarily reverting to "
z
display reading.
WARNING
Risk of black ice, even above
37 °F (3 °C)
Accident hazard
At a low outside temperature,
icy conditions must expected
on bridges and in shady road
areas.
ABS self-diagnosis not
completed.
ABS indicator light flashes.
Possible cause:
The ABS is not available because
the self-diagnosis has not been
completed. To check the wheel
sensors, the motorcycle must be
­­
" as the
driven a few yards.
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS error
ABS indicator light lights
up.
Possible cause:
The ABS control unit has de-
tected an error.
It remains possible to continue
riding. It must be noted that
the ABS function is not avail-
able. Observe additional infor-
mation on special situations
which can lead to ABS fault
codes ( 85).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC intervention
with Automatic Stability Control
OE
(ASC)
ASC indicator and warning
light flashes rapidly.
The ASC has detected insta-
bility at the rear wheel and has
reduced the torque. The warn-
ing light flashes longer than the
ASC intervention lasts. This fea-
ture continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention