Installation; Location; Mounting - Navman REPEAT 100 Manual

Installation

Location

The NAVMAN R100 is designed for above or
below deck installation. Select a position that is:
• At least 300mm from a compass
• At least 500mm from any radio
• Easy to read by the helmsman and crew
• Protected from physical damage
• Accessible to electrical cable connections
4.5mm
(1.75")
NAVMAN R100 User Manual
56mm
(2.2")
112mm
(4.4")

Mounting

The mounting surface must be flat. Use the
template to set the centre of the fixing hole.
• Drill a 32mm (1.25") diameter mounting
hole through the bulkhead.
• Remove the fixing nut. Peel the protective
paper off the foam gasket and attach the
gasket to the rear of the instrument.
• Insert the instrument through the bulkhead.
Hand tighten the nut and then finally tighten
with a spanner. Do not over tighten so that
the water sealing ability of the gasket is
damaged.
24mm
(1")
112mm
(4.4")
35mm
(1.4")
30mm
(1.2")
5