PAGE
INITIAL SETUP
2 2 2 2 2
INSTALLATION
CONNECT
2
Adapter Outlet on the back of the CP-725 charging
LOOP
cradle.
Cord Holder to prevent accidental disconnection.
3
PLUG
wall outlet. The LEDs on the charging
cradle will stop flashing when the
handset (with battery pack installed) is
placed in the cradle.
cord is not properly plugged into the telephone wall
jack, the CHARGING INDICATOR will flash when
the handset is out of the charging cradle.
1
PLUG
the CP-725's telephone cord into
a telephone wall jack.
the AC Adapter Plug into the AC
the cord through the AC Adapter
the AC Adapter into an electrical
NOTE: If the telephone
TONE PULSE
USE ONLY WITH
ADAPTOR M/N-14
TO WALL JACK